Wire & Cable
Product Details
We offer a broad portfolio of ruggedized wire and cable solutions engineered for reliable performance in harsh conditions, extreme temperatures, and demanding installation environments. Explore the full range of product types and categories designed to support aerospace, defense, industrial, and commercial applications.
key features
- Ruggedized for harsh environments & extreme temperatures
- Designed to support high-performance signal, power & data transmission
- Includes solutions across multiple wire & cable categories, from RF & data bus to coil cords & high-speed data cables
Our in-house integrated engineering teams are ready to take on your greatest challenges.
Explore Wire & cable
BMS 13-65 Cables
BMS 13-65 cables are manufactured, tested, and qualified in accordance with the Boeing BMS 13-65 specification.
ECS Avionics RF Cables
Half the diameter of RG cables and up to 75% lighter than MIL-C-17 standard cables, these Avionics RF cables are configured specifically for avionics systems that require a low-loss cable with frequencies between 0 – 12 GHz. Sold in bulk, they are available cut-to-fit or within a kit.
Portable Coaxial Cable Stripper Kit
Powered by a removable NICAD battery, our Portable Coaxial Cable Stripper cuts and strips coaxial cable in 3 seconds.
Seamless M22759/5-/31 Wires
M22759 (SAE AS22759) wires are high-performance, medium- and high-temperature hookup wires with extruded PTFE or ETFE, or PTFE/polyimide tape insulators, and stranded conductors.
Seamless M22759/80-/92 Cables
Our Seamless Wrap PTFE wire insulation and cable jacket offers all the advantages of a tape wrap with the smooth appearance and installation characteristics of an extrusion.
Seamless-T™ M22759/180-/192 Cables
Our Seamless-T™ product line meets the enhanced “seamless” insulation and enhanced requirements of AS22759/180-/192, once again raising the bar for outstanding performance.
Tufflite® SLT
Tufflite® SLT is a thin-wall, lightweight version of ST that can be used in various constructions. It also has value as a single conductor, offering 5% weight savings over the ST construction while maintaining the same mechanical properties.
Tufflite® ST
Tufflite® ST is a multi-purpose, normal-weight wire that exhibits exceptional performance across the critical parameters in airframe applications. It is available in three temperature ratings: 150 °C, 200 °C, and 260 °C.
Tufflite® TL
Tufflite® TL is a multi-purpose, normal-weight wire that exhibits exceptional performance across the critical parameters in airframe applications.
Tufflite® TLA
An increased wall thickness version utilizing an aluminum conductor for power feeder applications. Improved mechanical performance, including superior flexibility as compared to traditional polyimide-insulated power feeder cables. TLA is rated at 175°C.
Tufflite® TLR
Tufflite® TLR is a multi-purpose normal-weight wire that exhibits exceptional performance characteristics within the range of the critical parameters in airframe applications.
Tufflite® TLS
Tufflite® TLS is an increased wall version that can be used in applications requiring superior mechanical performance, such as abrasion resistance and dynamic cut-through.
TuffSpec® Wires
TuffSpec® is a line of PTFE tape-wrapped hookup wire designed for the extremely harsh environments of the oil and gas industry, available in both 200 °C (silver) and 260 °C (nickel) versions.
LITEflight® EP
The LITEflight® EP (Enhanced Performance) series of aerospace-grade fiber optic cables provides all the performance and benefits necessary to perform in the harsh environments of your aerospace and military applications, but with lower loss, tighter bend radius, improved thermal stability and better handling during termination and installation.
LITEflight® HD
LITEflight® HD (High Density) Fiber Optic Cables build on the industry-leading performance of all Amphenol CIT fiber cable products. With a cable designed for compatibility and cutting-edge fiber optic connector designs, LITEflight® HD Cables offer a multi-channel fiber cable in the smallest package, compatible with industry-leading MPO connector interfaces and emerging multi-fiber termination connectors.
Thermazone™ I (MIL-DTL-25038/1)
These wires are designed for critical circuit applications that require operation in extremely harsh environments, under vibration, and with direct flame exposure.
Thermazone™ IIIK & IIIG (MIL-DTL-25038/3)
These wires are designed for critical circuit applications that require operation in extremely harsh environments, under vibration, and with direct flame exposure.
Thermazone™ BMS 13-55 Firezone
BMS 13-55 is the Boeing specification for Firezone wire. These wires are designed for critical circuit applications where wires must operate in extremely harsh environments, under vibration, and with direct flame exposure.
Thermazone™ ESW Firezone
Our ESW Firezone cables are a range of high temperature, fireproof and fire-resistant single- and multi-core cables, incorporating PTFE and Polyimide, specifically designed for use in fire zone areas of aircraft engines.
Gigabit Ethernet Cables
Our Gigabit Ethernet cables combine industry-leading, high-speed performance with significant size and weight advantages over comparable cables. Their durable design and exceptional electrical and mechanical performance characteristics make them ideal for a broad range of high-speed Ethernet applications in the aerospace, defense, military, ground transportation, industrial, and RF communication markets.
Maxflite™ Data Bus & Video Cables
Provides high-speed performance for the popular video and data bus protocols. Designed for Severe Weather and Moisture Prone (SWAMP) applications, such as wheel housings, wings, and engine nacelle. Provides extreme strength, abrasion, and temperature-resistance from the combination of PTFE tape and a PTFE-impregnated glass yarn braid.
NETflight® Ethernet Cables
Built with a small envelope, lightweight housing, and faster bandwidth speeds to meet the demands of new technology and increasingly higher data-transmission requirements. Both standard and custom configurations are available for instrumentation, control, and signal applications of various types.
High-Voltage Composite Wire
Our 1,000-volt composite wires offer lighter weight and smaller diameters compared to similar extruded constructions in applications up to 260 °C.
High-Voltage Extruded Wire
Part of our high-voltage series, our high-voltage extruded wires are capable of 1,000-volt performance while maintaining excellent flammability and arc-propagation resistance.
Ultra-Flexible High-Voltage Shielded Composite Wire
Our 1,000-volt composite wires offer exceptional flexibility in smaller-diameter, lightweight constructions for applications requiring total temperatures of up to 260 °C.
Polyimide Equipment Wire & Cable
Polyimide equipment wire and cables are a compact, lightweight, and mechanically tough polymer with good flexibility, heat, and chemical resistance.
Sensor Cables
Our sensor cables are designed to maintain critical low-level signals from sophisticated sensors, providing a clean data transmission that helps preserve the information from the sensor.
Thermocouple Cables
Available in a broad range of thermocouple cable types and designed for accurate measurement and control in a variety of applications, including connecting sensors to devices, instrumentation and control, and temperature measurement.
MIL-DTL-17 Coaxial Cable
The outstanding electrical and mechanical properties of PTFE over a broad range of temperatures and frequencies make these coaxial MIL-DTL-17 cables the standard for a wide range of military and commercial applications.
MIL-DTL-25038/1 (Thermazone™ I Wire)
These wires are designed for critical circuit applications that require operation in extremely harsh environments, under vibration, and with direct flame exposure.
MIL-DTL-25038/3 (Thermazone™ IIIK & IIIG Wire)
These wires are designed for critical circuit applications that require operation in extremely harsh environments, under vibration, and with direct flame exposure.
MIL-DTL-27500 (NEMA WC27500) Cables
MIL-DTL-27500 (NEMA WC27500) cables incorporate from one to fifteen M22759, MIL-W-25038, or MIL-DTL-81381 wires, plus a single or double shield and a single or double jacket. MIL-DTL-27500 part numbering system provides for many combinations of cable construction characteristics.
MIL-W-16878 (NEMA HP3, HP4) Wires
MIL-W-16878 wires (or NEMA HP3 and HP4 spec) are general-purpose, medium and high-temperature hookup wires, with PTFE or FEP insulation. Each insulation type is available in thin, medium, or heavy wall thickness, for voltage ratings from 250 to 1,000 volts.
MIL-W-22759/80 to/92 (Tufflite® ST)
Tufflite® ST is a multi-purpose, normal-weight wire that exhibits exceptional performance across the critical parameters in airframe applications. It is available in three temperature ratings: 150 °C, 200 °C, and 260 °C.
MIL-W-22759/80 to/92 (Tufflite® SLT)
Tufflite® SLT is a thin-wall, lightweight version of ST that can be used in various constructions. It also has value as a single conductor, offering 5% weight savings over the ST construction while maintaining the same mechanical properties.
MIL-W-22759/80 to/92 (Tufflite® TL)
Tufflite® TL is a multi-purpose, normal-weight wire that exhibits exceptional performance across the critical parameters in airframe applications. This cable is part of a family of wire and cable in three temperature ratings: 150 °C, 200 °C, and 260 °C.
MIL-W-22759/80 to/92 (Tufflite® TLS)
Tufflite® TLS is an increased wall version that can be used in applications requiring superior mechanical performance, such as abrasion resistance and dynamic cut-through. This insulation system may be used as a reduced-size and weight replacement for MIL-W-22759/5 to /8.
MIL-DTL-81381 Wires
Although designed for aerospace use, these wires are ideal for commercial applications which can benefit from their high temperature rating and resistance to abrasions and solvents.
MIL-W-81822 (SAE AS81822) Wires
MIL-W-81822 (SAE AS81822) wires have solid conductors for wire-wrap termination, with extruded insulation of PTFE, PTFE with polyimide hardcoat, or ETFE. Each insulation type is available with a choice of three silver-plated conductor materials. All are rated at 300 volts.
Seamless M22759/5-/31
M22759 (SAE AS22759) wires are high-performance, medium- and high-temperature hookup wires with extruded PTFE or ETFE, or PTFE/polyimide tape insulators, and stranded conductors
Seamless-T™ M22759/180-/192 Wire
Amphenol CIT’s Seamless-T™ product line meets the enhanced “seamless” insulation and enhanced requirements of AS22759/180-/192, once again raising the bar for outstanding performance.
Coil Cords
Designed for harsh-environment aerospace and industrial applications. Strength, flexibility and resistance to harsh chemical environments across a wide operating temperature range.
Low-Noise Coaxial Cables
These cables minimize triboelectric noise generated by cable movement and provide superior shielding to protect signals from external interference. They are ideal for use with piezoelectric accelerometers or other sensitive transducers, or other applications with low-power signals and/or electrically noisy environments.
EFGLAS Equipment Wire & Cable
A composite insulation of glass and PTFE (Polytetrafluoroethylene), EFGLAS provides extreme strength, abrasion, and temperature resistance from the combination of PTFE tape and a PTFE impregnated glass yarn braid.
BMS 13-58
BMS 13-58 is the Boeing specification for Severe Weather and Moisture Prone (SWAMP) wire.
UL/CSA/BS Cable & Hookup Wire
Meets or exceeds Underwriters Laboratories (UL) and/or the Canadian Standards Association (CSA) safety standards.
